Friday, January 16, 2009

NEWSWIRE: ToC Blog, Book Reviewed, Lube contin.

Cruzio Tour of California blog
You may already know that the Tour of California, the most important race in America, commences in Sacramento on February 14 and will race right into my home town of Santa Cruz on the 16th. This is a huge deal for us and we're all working to promote the race and make it a success so it comes back again. For my part, I've begun blogging about the race for local Internet provider Cruzio.com and I wanted to give you the link so you can follow along (screenshot above). I'll take a local perspective on the race and keep it fun. Let me know if there's anything you'd like me to cover...............In other blog news of a commercial nature, I was delighted to see that top NorCal racer Michael Hernandez who blogs for the NorCalCyclingNews has some great things to say about my Your Home Bicycle Workshop book. I wanted to share his kind words (scroll a bit) and use this space to thank him, too. Appreciate the support, Michael...............Also, a reader added a great tip you might want to try in my post about chain lubing. He suggests simply using car wax to lube your chain. Scroll to the lube post and read the comments to get the whole story, and post your comments if you try it to let us know how you like it.
Have a nice cycling weekend!

Monday, January 12, 2009

Wax-based chain lubes?

Question 1: I know that paraffin wax is often used on some metal surfaces such as drill bits and saw blades to keep them sharp and to prevent corrosion. I talked with a beekeeper and I was told that beeswax is actually best for these purposes. I have heard that some chain lubes contain some wax, is this true? How can this wax retain its liquid properties? I also heard that some people dip their bike chains in wax. Does this help? I cleaned my chain thoroughly and applied a stick of beeswax to it as I rotated the chain. I also applied wax to my cogs. Should I also apply some oil to my chain or is the beeswax alone sufficient?

Appreciate it,
Joe

Q 2: Jim - As a general rule, things are pretty dry out here where I ride in Denver, so I don’t need an extreme lube. I also like to keep my drivetrain pretty clean. Thus, I like some of the wax-based lubes. I really like how clean White Lightning is, but it dries out and begins chirping like after two rides. I just tried another dry lube by SRAM, and it held up a little longer, but it seems to attract gunk more like a wet lube. What’s your favorite lube?

Thanks,
Paul

A: Good questions, guys. Whether or not a wax-based bicycle lube, or basic paraffin will work as a bicycle chain lube depends mostly on where and how you ride. Wax is best for relatively dry, clean climates and on bikes that aren't ridden in the rain or wet.

White Lightning wax lubeIf those are your conditions, Joe, an easy way to try a bicycle chain wax and see if you like it is to get some White Lightning Clean Ride, which is a popular self-cleaning wax lube. It's self-cleaning because you apply it to your chain and let it dry overnight. The next morning the chain is dry and as you ride, the wax build-up on the chain chips off in small flakes (don't worry, there's still wax on there lubing the drivetrain). As you apply more wax when you need it and keep riding, any old grime on your chain chips off until you're left with an almost white chain that's completely lubricated with the Clean Ride wax lube. You can also lubricate your cassette cogs with it.

I live in Santa Cruz, California where it is dry most of the year and I've used White Lightning on bikes I only ride on dry days and it works just fine. You should give it a try if you live in a dry area and don't get caught in the rain often, and see how it works for you.

You mentioned beeswax. I haven't tried that as a chain lube, but there are cyclists who believe you should use paraffin from the grocery store. They heat the paraffin to melt it and put the chain in the hot paraffin until it gets hot, too. That causes the paraffin to penetrate the chain nicely and get enough lube on and in it. They then remove the chain so the excess wax drips off, the rest dries on the chain, and they install the chain on the bike. A wax job like this could give you a month's worth of lube if you stay out of the rain and dirt. But, it is easiest if you have a connecting "master" link on your chain like the Wipperman Connex link . If not, you'll need to push out a pin and use a replacement pin each time you remove your chain to give it the hot wax treatment. That's not really recommended since every time the chain comes apart you need another new pin and you can damage links if you're not good with your chain tool.

You can certainly try rubbing the paraffin or your beeswax on the chain and cogs, but that will only get a light layer on the outside surfaces. You need to lube the inside too, where the links and rollers wear on each other. That's why you heat the chain and wax to get it to flow inside and all over, too.

You don't have to heat the chain to lube it with White Lightning because it has a carrier in it that keeps the wax liquid enough to penetrate the chain as is.

So, ultimately, if you're interested in waxing your chain, you should give White Lightning a try because it's easy to use and effective. I think you'll like it - as long as you don't live where you have to ride in the rain a lot.

If, like Paul, though, you discover that the wax lubes you try leave your chain squeaking in short order, I recommend another lube. I actually used White Lightning for a long time back in the mid 1990s but eventually got tired of the chirping when it ran out while I was on rides.
ProLink lube
So, now I use Pro Gold ProLink. I've had good luck with it. To apply, you put a drop on each link at night, then wipe off the excess in the morning and you should get about 2 weeks out of it before you need to apply more. (Depending on how often you ride and your riding conditions, of course.)

The ProLink isn't perfect. You still have to clean your chain once in awhile, but I just do it by applying some more lube and wiping the chain and rings down well. As long as you keep it wiped clean like this and don't put on too much, it should work great for you, preventing squeaking, providing a nice, smooth ride and ensuring your chain, cogs and chainrings last as long as possible. I learned about Pro Gold from Uncle Al at RoadBikeRider.com. He swears by it and he rides in Montrose, Colorado.

There are other great lubes available from a variety of makers like Pedro's or Finish Line, so if wax or ProLink isn't right for you, check with your riding buddies and see what they like or visit your local bicycle shop and ask what they recommend, too. Sometimes it takes a little experimentation to find a lube you love.

Jim