Jim's Awesome Last Minute Cycling Gift Guide

Jim's Awesome Last Minute Cycling Gift Guide
By Jim Langley

You're lucky to be a cyclist when it's gift-giving time because it's easy for your friends and family to find goodies you'll love. To help, here are some ideas sure to please any bicycle nut. These are year-round cycling gifts, so don't feel obligated to use them all up for the holidays. Also, you'll find some of these items and a lot more ideas at your local bike shop. They typically offer gift certificates too so your favorite sprockethead can choose their own cycling toys. You might also gift them a coupon for a tune-up or bike fit - money in the bank for when their machine needs a little professional TLC.

Let's start with something comfortable, stylish, practical and affordable, DeFeet's Woolie Boolie socks and wool HandSkins ($13.50 & $12.50 respectively). These super-soft, wicking, warm socks and gloves stretch for a custom fit, insulate their fingers and toes even when they're wet, and are super durable for long life too. They'll like them so much they'll wear them all the time.

You may have noticed that more and more people are kicking the internal-combusting habit and enjoying the freedom and fun of gliding around town and spinning back and forth to school or work on versatile and elegant city bikes. And note, that even if your cyclist has a nice road or mountain bike already, they probably would prefer to save that for recreational/sport/fitness use and have a workhorse city bike built for the job. To help you select a winner, and a townie that's every bit as unique as they are, I've listed a few hot, new urban bicycles that will change anyone's commuting life for the better.

Keep in mind that, just like that Nissan Cube, what they "drive" says a lot about who they are, so you don't want to gift them just any old bike. It needs to be special, almost one of a kind, something as cool to ride as it is to sit back and admire kicking back on a park bench with friends on their lunch break. And, the perfect choice is Pashley's Roadster 26 (2009 model, approximately £560), as classic, refined and practical today as it was back when Kennedy was in the White House.

With a sweet-riding British lugged-steel frame, simple-to-operate 3-speed drivetrain, powerful and all-weather hub brakes, a fully enclosed chain and fenders to save your clothes, and even a handcrafted Brooks B72 leather saddle, they'll be the envy of their workmates and be tempted to take the long way home every night. No worries, as the Roadster is even equipped with dynamo lighting. Scroll to see my other city bike gift ideas.

Flat tires are a fact of cycling, and carrying a quality pump makes all the difference when they have to fix one. You'll make the job much easier by gifting them one of Topeak's Morph mini-pumps (about $40), which have features that make inflation (often difficult with lesser pumps) a piece of cake. There are Morphs for road and mountain bikes. What makes these mighty inflators special is that they all feature a fold-out foot, T handle, long hose and easy-to-attach thumblock head that fits all valve types. And these innovations let them stand the pump on end, step on the foot and push against the ground for super-easy and fast inflation. The Turbo Morph even has a trick flip-out gauge.

Speaking of city bikes, if they're building their own townie, or getting around town on a bike without any, they'll love receiving Planet Bike's Grasshopper fenders ($115). They won't be available in time for holiday gift giving, but should be by the time the snow has melted. Made of fast-growing Moso Bamboo in a 2 ply laminate with a durable marine-grade finish and rustproof stainless-steel stays, they'll add a major touch of class to their bike and make any ride greener too. Plus, these are the first double-curved (not flat) wood fenders. Contact your local bike shop or visit the company's website for availability.

Whether they're fixing that flat I was talking about or up to their elbows in bearing grease, giving them a proper bicycle repair stand will make all their bicycle maintenance much, much easier. And, Park Tool has just what they need in their Home Mechanic Repair Stand lineup, model PCS-10 or PCS-9 ($170 & $130). They clamp all bicycles securely, hold them up high for ease of seeing what they're doing and so they don't have to bend over, fold for easy storage/portability and are built to last a lifetime. If your cyclist is flipping his machine upside-down to wrench or hanging it from the rafters Park's Home Mechanic Repair Stand will make the ultimate gift.

Coffee table books make super gifts but it's not that easy to find good ones for cyclists. Fortunately, Vintage Bicycle Press has come to our rescue and is writing and publishing some fascinating new reads that any pedal pusher with an interest in classic bicycles will enjoy. Check out their The Golden Age of Handbuilt Bicycles $50 and The Competition Bicycle $60, two books sure to put a smile on their face. Or, consider subscribing them to the company's Bicycle Quarterly magazine.

While I'm on the subject of books, allow me to plug my latest tome, Your Home Bicycle Workshop ($19.95). Note that this is an e-book, so you can download it for instant gift giving joy, and it will open immediately on any computer. Plus, it's chock full of my advice, how-to's, tips and tricks for setting up a custom home bicycle workshop, which is the perfect winter project and a sure-fire way to add another level of fun to their cycling. Not to mention how much money maintaining and fixing their own bikes can save.

Vintage ten-speed aficionados Velo-Retro offer an impressive selection of classic-print T-shirts that will garb your bike nut in color and style. Plus, they'll have something truly unique to wear around and show off to their pedaling pals. At just $19.95 for a custom-printed tee, you may want to get them several styles.

And now, for something completely different, how about gifting the cycling woman in your life an education in bike repair at United Bicycle Supplies Introduction to Bicycle Maintenance for Women? You guys could head up to beautiful Ashland, Oregon this summer and you could take in the scenery while she spends a wonderful week wrenching and learning the ins and outs of bicycle repair - a dream experience for those taken with all things spokes, chains, cables, bearings and gears. The class runs from July 26 to 30, costs $850 and is a little tricky to find on their website. Go to http://www.bikeschool.com/ click on Curriculum over on the left navigation bar, and you'll then see Introduction to Bicycle Maintenance for Women listed under Mechanic Course Descriptions. Or just give the good folks up there a call at 541 488 1121, and tell them Jim Langley sent you.

I've been riding on Neuvation wheels for a few years now (that's about 20,000 miles), and they've been excellent and completely reliable. But, what's even better for the gift giver is that these quality hoops are as affordable as they are desirable. Neuvations offers super-low pricing for their quality wheels by cutting out the middle men and selling direct, so you can get their M28 wheelset and blow away your cyclist with a sweet pair of hoops for a mere $249, or go with the R28s for $220. (That's today's prices and they may change.)

You can't give a more important gift than the gift of safety, and a nifty little safety widget every cyclist will love is Knog's Frog, a weird little rubber flashing LED light that attaches just about anywhere. It wraps around their seatpost, handlebars, or even their helmet and is held by its own built-in clip. It's easy and fast to install and remove and no tools are required. And, it's so small they could attach several to be even more visible. Knogs come in a few fun colors, offer steady and flashing modes, include the battery and sell for $17.95.

Every cyclist needs a good lightweight jacket for those tweener days and Gore Bike Wear makes a winner in their Paclite Power Lady Jacket ($200; men's versions are available too). Made of Gore's weather-resistant Gore-Tex and Windstopper fabric with a tuck-away long tail and high collar, this cozy top will give them the protection they need and top comfort too, with its shaped elbows and tailored cycling cut for excellent freedom of movement. Other fine details include the adjustable cuffs, stow-away pocket, drawstring elastic waist and reflective logos.

All bicycles have provisions for bottle cages so you can take along a drink and have easy access. But there are bottle cages and then there's the King titanium bottle cage ($60), a handcrafted in the USA (by Ron Andrews), piece of titanium artistry that says loudly and clearly that your cyclist doesn't put just any cage on their machine. Made of rugged, super-light, rustproof and non-bottle-marking hollow 3Al/2.5V titanium, the King cage weighs only 28 grams (watch their surprise when they open this gift). But, the most impressive thing is how tightly it holds bottles. No matter how hard they ride or how rough the roads and trails they'll never have a bottle bounce out when they're using a King Cage.

Now, back to those city bikes I promised. Gift them Raleigh's Alley Way and they'll be zipping around on a green machine that's as comfortable and stylish as it is high-tech and practical. Sporting a light and nimble Reynolds butted-chromoly frame, easy-rolling 700c wheels, a wonderful Brooks leather saddle and easy-to-reach arc handlebars, it's a joy to ride. Plus, it boasts a belt-drive drivetrain, which means goodbye chain lube and grease stains! And, they also get disc brakes, fenders and 8 gears that make easy work of the climbs. Check with your local Raleigh dealer for pricing as this beauty is new for 2010.

And, there's nothing like a touch of Dutch to pedal around town in style and comfort. Get them Electra's Amsterdam (2009 Girard 3i shown), and they'll enjoy the natural upright riding position, the riding ease of the laid-back frame that lets them put both feet flat on the ground anytime they want, and a simple-to-operate 3-speed drivetrain. Other sweet features include the full chainguard, skirt guard, built-in lighting system, handy rear rack, plush spring seat and low-maintenance hub brakes. Don't miss the custom paint and matching bell that makes these sweet bikes as beautiful as they are fun and practical.

I hope these ideas help you find the perfect gift for the cyclists in your life. Thanks for reading and ride safe!
Jim Langley (jim @ jimlangley.net)

Inspiring Bicycle Movie

I first saw Bicycle Dreams, the best movie yet about the extraordinarily difficult Race Across America, last summer at former RAAM star Lon Haldeman's PacTour Wisconsin Camp, and was impressed.

So it was nice to hear from director Stephen Auerbach and learn that he had "modified the film since I saw it - in a big way," and I asked for a review copy of the $19.99 DVD, which has won multiple awards now.

After watching this re-edited version I can appreciate all the awards. The typical RAAM story as depicted on ABC Sports over the years and in magazines, is almost as tiring to watch as it is to actually ride the race. Bicycle Dreams has its share of suffering and misery - especially with the death of Ultracycling Hall of Famer Bob Breedlove during the race.

But, instead of despair or depression, what comes across watching this riveting story unfold are the inspiring qualities that drive people to remarkable lengths to achieve their goals. I was especially taken with sports psychologist and second-place finisher Chris MacDonald's insightful analysis of why athletes are drawn to impossible tests like RAAM and it made me appreciate the race in a new light.

Equally poignant is winner Jure Robic of Slovenia's route to becoming the top ultra-endurance athlete in the world. And, Catharina Berge's phenomenal effort as one of the few women that tackle RAAM.

Good cycling movies are hard to come by. Bicycle Dreams is as good as it gets, and it's about a lot more than cycling, which is what sets it apart. You can purchase it here. It'll make a great gift for any cyclist.

Funny Conference Bike Video

The conference bike has been around for awhile but I think this video is new http://www.youtube.com/watch?v=4cDDBM9gJts

Q&A: Chain stretch, wheel centering, transporting a trike

Q: Hey Jim,
I'm sure that you've answered this over the years, but I couldn't find the issue addressed. I came to riding a bit late in life (about 35) and fell in love with the sport. Recently, I was told that I needed to replace the chain on my Viner because I had stretched it over time (4,000+/- miles this past year). I ride Dura Ace and am fine with the $50ish expense, but I just can't imagine that I produce enough torque to 'stretch' metal. I ride in Georgia and so there is quite a bit of climbing, but still... So my question is - "Is this for real, or are the wrenche's at my local shop snickering as I walk out the door?" And as a follow up 'If I can stretch metal, can I also leap tall buildings in a single bound?"

Ross

A: Good question, Ross. It’s a matter of slang. The mechanic said you “stretched” your chain. But, this is slang for wearing it out. What happens is the parts (the rollers and pins) that make up the chain get smaller and when this happens play develops between the parts of the chain – creating more clearance. Then, when you measure the chain to tell if it’s worn out, it has actually gotten longer due to all the parts wearing. So, the word we often us to explain that the chain is worn out is “stretched.” But, your massive legs didn’t really stretch the chain, they just wore it out from all those miles ;-)

If you get a tool like the Wipperman Chain Wear Indicator shown, it's easy to check your chain and tell when it's worn out.

Jim

Q: Hi there,
I wonder if you could advise me on why my bike pulls to one side so I constantly have to straighten up while riding, please? I bought it only recently, so I could take it back to the shop for fixing, but the shop is over the other side of town, so if it is something easy to fix I would rather do it myself. The brakes are the normal block ones not disc.

Thanks in anticipation,
Irene

A: By any chance did you remove the front wheel and then reinstall it crooked, Irene - like after putting it in your car? The front wheel must be exactly centered in the fork. If it is off to one side or the other, it can cause the bicycle to pull. So, I would loosen the front wheel, make sure it's centered in the fork and then tighten it. You can usually see if a front wheel is centered just by looking from the front for even clearance between the wheel and the fork on each side. A better way to tell is to use your fingers as feeler gauges. Just use the same finger on each hand and slide them in from behind and next to the rim or tire to feel the space between the wheel and fork. This should feel exactly the same on both sides.

If this isn’t the problem, you should check with your bike shop because it might be an issue they need to address,

Cheers,
Jim

Q: Hello! I need to transport an adult tricycle and I have no trailer hitch, trailer, or truck. The only thing I can come up with is to disassemble the trike and cram it into my Chevy Cobalt without trying to tear up the interior of the car. Do you have any suggestions? Mechanical things stupify me. Any reasonable suggestion is appreciated! Thank you!

Debbie

A: Here’s what I’d try, Debbie. It should work fine and shouldn’t hurt the car or trike. No disassembly is required. Simply pick up the trike and place it on the trunk of your car. The tires are rubber and they shouldn’t hurt the paint and the bike doesn’t weigh a lot so it shouldn’t be able to dent the trunk. If the trunk lid is super soft and might dent, first put a towel down and then put a piece of wood like a piece of plywood on the trunk (not a whole sheet - just enough to fit beneath the trike's rear wheels). Then put the trike’s rear wheels on that piece of wood (the front wheel is facing forward, probably resting on the glass, or even roof). Now the wood will spread the weight and there’s no way the tires will be able to dent the trunk lid. So, you now have a towel down on the trunk lid, next the piece of wood. It just needs to be wide enough to go under both trike rear wheels. And then the trike is on top of the wood.

To hold the trike on, use stretch cords. Wrap them around the rear wheels (you want to wrap the wheels well to lock them as that will prevent the trike from moving), and then pull the cords to the edge of the trunk lid or under the wheel wells and attach the hooks there. If it's easier you can just tie or tape the wheels so they won't turn and then just attach the stretch cords from the trike to the car. You may have to get long stretch cords - and get good quality ones. The stretch cords will hold the rear of the trike on the trunk and keep it from moving left or right, while the tied/locked wheels will keep it from rolling front to back.

Now, to hold the front wheel of the trike that will be resting somewhere near the roof, you just run a rope or a long stretch cord across. Pass it beneath one window and then roll up the window to hold it in place. Or tie it to something in the car. Then where the rope or bungi meets the trike's front wheel, wrap it around the tire a few times. Then take the other end and pass it through the other window and tie it inside the car somewhere. (You can also tie or tape the front wheel to the trike's frame to lock it and keep it from turning like you did with the rears.)

Your trike will now be held securely on the back of your car. The only thing you need to be careful about is not driving under anything too low because you now have something tall on your car. Other than that this should work fine.

I hope this makes sense. Let me know if you have questions,

Have a nice trip,
Jim

Q: Jim - I have an older Norco & recently I changed the rear tire - since then, I've had issues with the rear wheel nut. I get the wheel in the right position but then when I tighten the nut to secure the wheel, it gets pushed out of line & then the wheel rubs. Any suggestions?

Deborah

A: Yes, Deborah,
You need to outsmart that wheel :-) To do it, only snug one nut on one side. Then check to make sure the wheel is centered. When it is, snug the other nut. At that point the wheel will stay in place and you can fully tighten both nuts. But do it gradually, adding a little to one nut, checking that the wheel is still centered, then adding a little tightness to the other nut, checking, and so on, until both nuts are fully tight and the wheel is centered. What's causing your problem is trying to fully tighten one nut first. This can cause the axle to turn with the nut and the axle can move out of position changing the wheel position as you tighten the nut. Tightening the nuts as I explained will prevent this happening.

Give it a try,
Jim

Q&A: Colnago Book, Car Racks, New Old Brake Hoods

Q: Dear Jim,
I've been given your name from our local bookshop when I went enquiring about Colnago books. Our son David is a dedicated cyclist and a collector and restorer of Colnago bicycles. I would dearly love to get for him some catalogues from the 80's showing these frames. He is so good to me that I thought I would surprise him if I possibly can. Am I in the right direction sending you this message? If you have time, I would love to hear from you, (I'm not even sure where you are!)

Kind regards,
Pauline - Melbourne Australia

A: Nice to hear from you, Pauline. I'm actually in California so a long ways from you. Before I get into how to find Colnago books here's a link to an excellent Colnago page showing a selection of beautiful Colnagos. I'm sure David will like it.

For finding Colnago books and catalogs, I recommend searching on ebay.com. Just search on the words "Colnago book" or "Colnago catalog" I tried that recently and found 3 catalogs and a book listed here on USA ebay. You might find more on your local ebay. FYI: The photo here is of a promotional not-for-sale book from my library that Colnago published in 1986 - but there have been other books and catalogs and you'll surely find some if you hunt a bit.

You could also check your telephone directory for bicycle shops and call a few and ask them if they ever sold Colnagos. It's a possibility. If they didn't they might be kind enough to tell you a local shop that did and you could contact them and inquire whether they have any books, catalogs or posters they'd sell (some shops might even give some things away if they got them free as promotional materials).

Lastly, you could also contact Colnago, the company in Italy and ask them. That might sound crazy, but they're just a bike company, Italians are very friendly, and you might get somewhere for the cost of a long distance phone call. Here's a link to their site where you will find contact information.

Checking their site, I see that the Colnago distributor for Australia is in Sydney. You might also contact them. Here's the contact info:
FRF SPORTS
3/595-615 PRINCES HWY, NSW 2044
TEMPE (SYDNEY)
Phone: 0061-2-95599011
Fax: 0061-2-95599088
rosanna@frf.com.au
http://www.frfsports.com.au

Hope this helps you find an awesome Colnago gift for David!
Cheers,
Jim

Q: I am moving cross country and need to buy some type of bike rack for my car. I have a 2006 Toyota Rav 4. I have no idea which one to get. I've also been looking on craigslist.org, but just don't know. I want an affordable option and something that will be dependable with my new bike. Any thoughts?

Thank you!
Kelly

A: Hi Kelly,
The tricky thing is that I think your car has a spare tire mounted to the back (I'm a bicycle expert, not a car expert ;-). If I'm right on that, I would recommend looking up the bike shops in your area in the phone book and asking them what rack they have that will fit your car. Or, you could visit the rack websites like www.saris.com or www.thule.com or www.yakima.com and look for the link to the configurators or fit charts. For example, Thule's is called "Rack My Car" and is at the top of this page. The Saris rack finder is on this page (on the left). You just select your car, year, model and make, tell how you'll use the rack, and the online tool tells you which racks fit. You can also find a dealer in your area on the rack sites.

It should be pretty straightforward. Once you know which rack fits your car, you will be able to search for it on craigslist.org.

I like simple racks that you can put on and take off and that fold up easily for storage. There might be one that attaches to your spare tire. Or maybe you have a hitch (receiver) under that car and if so, you can get a hitch rack. Those go on really fast and are super easy to use, so that would be a good way to go for easy on/off and easy bike mounting. The ones that hang on the back usually use straps and they take a little adjusting the first time you put them on, but after that it's almost as easy to put them on the car as it is a hitch rack, and strap racks are cheaper too.

I hope these tips help you find the perfect rack.
Jim

Q: Dear Jim,
I'll be putting Cane Creek replacement hoods on original non-aero Dia-Compe brakes/Schwinn Super Le Tour 12.2. Since the cables have to be fed through holes in the hoods, I would appreciate a recommended procedure for releasing the cables from the levers, or lever removal, pins, complete brake hood from bar, etc., and reassembly tips.

Thanks much if you can find time to respond before I attack this project in a clumsy manner and ruin something on my 32-year-old otherwise mint bike. The old gum rubber hoods have been removed and all metal parts are nice and clean already.
Hugh from Arizona

A: Hi Hugh,

You don't have to take anything apart. Just put those new hoods in a little cup of warm to hot water and let them "cook" a bit. They'll then slip right over the brake levers from the bottom nice and easy. Just slide them on gently. They're stretchy enough to do it dry, but the little bath will make them even more supple and slippery. An even faster method is to just breathe in them a few times. This slightly wets the insides and makes them slip over the levers. But, if you use the hot water, they'll be even less likely to rip even if you're a bit "clumsy." You could also use a harmless lube like isopropyl alcohol, which will make them slippery too. You'll just need to wait for it to dry for the levers to stick fast again.

In case you don't know how to detach the cables at the levers here's how: It's really easy. No wrenches or adjustments needed at all. Just remove the wheels and then squeeze the brake calipers fully closed (both brake pads should be touching). Then using something like a toe strap or a zip tie, "tie" the brakes so they stay like this.

This will create slack in the cable and all you have to do is push toward the levers with the cable and jiggle the lever a little bit to get the head of the cable to pop free of its holder inside the lever. There's a slot in the cable head holder for this purpose. Once you get it free the cable will lift right out of the lever. You can then slip on your rubber hoods and reverse the process with the brake cables to hook them back up.

With this approach no brake adjustment is needed at all. It should only take about 15 minutes to do the whole thing. Those old brakes were really nice to work on

Have fun getting that classic back on the road,

Jim

Q&A: Bike Repair Schools, Bike Storage, Fixie Gearing, Scratched Carbon and more

Q: Hi, Jim. I'm in Kailua, Hawaii. I am a bike enthusiast and have been competing in time trials. I have always wanted to attend a bike mechanic course and understand some of the main schools are in Oregon and Colorado. I will be visiting my daughter in Santa Monica soon. For efficiency, I wanted to attend a course/school in the area, or maybe work in a great bike shop (as free adult supervised labor) to learn much more about bicycles. I would appreciate any suggestions.
Thank you,
George

A: Nice to hear from you, George. LA's a huge place so I think there's a good chance you can find some type of bike repair school there. What I would do is have your daughter call around to the shops in her general area and ask them if they're holding any bike repair clinics this summer. I bet if she calls 3 or 4 shops she'll either find out about a class a shop is offering or about one held at a local college.

Rec departments often hold them in the summers in big cities, too - and they're usually taught by local bicycle mechanics. I think since LA is so large that there's a good chance you'll find something like this. It will just take a little searching on the part of your daughter but I think just using the Yellow Pages and calling shops down there should do the trick.

Working in a bike shop - even for free - is something you can ask about, but I suspect most shops won't be interested due to laws that put them in jeopardy should they employ you and not pay you. If you'd like to learn more about the main bike repair schools, visit United Bicycle Institute and Barnett Bicycle Institute.

Q: Hi Jim,
I recently re-married to a wonderful non-cyclist mother of two. Of course, I immediately turned them all on to cycling! It worked so now the trouble is bike storage. I don't have a garage and my basement was remodeled into a family space so I lost my bike room and work area.

I need to build a place to store our bikes plus a workshop space. We currently have 11 bikes plus my 10 month old son's trailer. (I'm sure he'll have several bikes soon enough which will add to the quiver.) These developments have interested me in your Home Bicycle Workshop book. I'm sure it will address lots of areas but my main concern is bike storage. Does your book address things like ceiling height recommendations, wall vs. ceiling vs. floor vs. stands, etc?
Thanks in advance,
Steve

A: Yes, Steve, my book (photo) talks about storage solutions. You can read more about it and order your very own copy here, but I'm sure I don't address every possible situation. From what you wrote, it might make sens to line all your bikes up on one wall, hanging each by a single hook. You'd alternate bars up, bars down, and they

wouldn't take up much space except to poke out into the room as far as they are tall. You might want to add a wall "bumper" 2 x 4 for the tires (on the wheel that hangs lower) to bump onto so they don't mark the wall. Since studs don't run closely enough, you can use a long 2 x 4 to screw the bike hooks into as close as they can be placed to space your bikes right (just stand your bikes up side by side and measure to see what will work best). Then you can screw the 2 x 4 to the wall with lag bolts into the studs on the wall.

You need a fair amount of ceiling height to put them overhead, but if you have it, you could hang each bike by the wheels with 2 hooks and that's pretty easy if you have rafters overhead or joists to screw to. Don't put them any higher than you can reach, though, or you won't be able to get them down easy/fast,
Jim

Q: I have a 1994 Klein Attitude with a pressed in bottom bracket. My problem is that the spindle snapped. Can you help me find a replacement bottom bracket?
Thanks,
Stephanie

A: Thanks for the email, Steph. You probably don't need a whole new bottom bracket but just the bottom bracket spindle. You can get it from Phil Wood. You may have to have a shop order it for you as I'm not sure Phil sells direct to consumers. You may want the shop to install it too, so they can make sure it's right and regrease your bearings too.

Q: I managed to crash my road bike this weekend and amazingly did little damage appart from frustratingly scratching my deep section carbon tubular rims. The scratches are deep enough to be felt when braking on the wheels, as they are on the braking surface, but not so deep (I hope) to be serious in structural terms. I was planning to fill them (epoxy?) and then sand/polish them back down so they are flush with the braking surface. Can you give me any advice about how to approach this and what to use. It would be much appreciated.
Cheers,
Ned

A: You could try basic 5-minute epoxy, Ned, but it's messy to work with and thick enough that if it's only small scratches it might leave too thick a layer to easily stand down. A bigger issue is that epoxy usually softens with heat and braking causes heat. So it may not work very well to patch the braking surface. It's important to make sure the scratches aren't structural. You could tap on the rim with a quarter to see if it sounds different than a non-scratched part of the rim. If not, the rim's probably okay. I bet the scratches won't effect the braking much, and they'll smooth out as you brake, so you might just keep riding the rims and see if the braking issue goes away.
Good luck,
Jim

Q: I just purchased a Cannondale Capo singlespeed bicycle. I have been riding a Cannondale R500 road bike for years now, and really never ever switched out of the highest gear, so I figured I would simplify things. Upon purchasing the Capo I feel like a hamster spinning in an exercise wheel. The chainring and cog have way too low of a ratio for me to feel like I am doing anything. The crankset and cog give me a 42/17 gear.

The cranks only attach to the chainring in four places instead of five. Basically I want as large a chainring as possible, and as small a cog as possible, but I do not want to get rid of the cranks as I like the way they look and feel. What options do I have? I want my new bike to feel as comparable as possible to riding in high gear on my previous bike. Thanks for any help you can give me.
Sebastian

A: Hi Sebastian,
Since you just purchased your Cannondale, the best thing to do is to return to the bike shop where you bought it and tell them you want harder gearing. Because it's a new bike, they should be happy to switch out the gearing for you, and if you're lucky, at no cost to you. Also, since they carry that bike, they should have the chainring and cog to fit, or can order them.

You probably don't want to go to as high a gear as what's on the high end of a road bike. That would be a 53/12 usually, and that's a super hard gear. It would be hard to get going from stoplights and difficult to pedal up any real hill. So, what you might do is just change the rear cog to a 13 and try it. That'll give you a much harder gear and I bet you'll find you like it. That way you won't need to change the chainring.

If you have to pay for the parts, the rear cog will be inexpensive, but the chainring could cost a fair amount, so it's always better just to go with the cog if you can. You might want to have a selection of cogs so you can vary the gearing from time to time.

Keep in mind that putting on a smaller cog may mean shortening the chain, too. But, I would think since it's a new bike that the shop would be happy to do this for you for a small fee or for free.

Hope this helps and have fun on that great new bike!
Jim

Q: Hi Jim,
I have a TT bike with 650 x 21 tires/wheels. Will a standard inner tube, size 700C, fit these wheels?
Thanks
Jim

A: Hi Jim,
You should use a 650c tube in those wheels/tires. If you were to get a flat tire while out on a ride or during a race, and not have the right size tube - or maybe you needed to borrow a 700c tube from someone riding with you - you can stuff it into the tire and use it to ride home on. But, the 700c tube is larger diameter and you'll need to fold it over a little to get it to fit in the tire. So, it's possible to use them, but it's not ideal. The tube adds weight, isn't as easy to install and doesn't install correctly with the fold in it. For every-ride use, I would stick with 650c tubes, which is the right size for that tire/wheel.

Hope this helps,
Jim

Q: Hi Jim,
I am a female cyclist, road bike, kinda new, a year or two. My computer is not displaying the cadence. I do not know were the sensor is or how to fix it. Can you help?
Thanks!
Debi

A: Hi Debi,
Bike computers usually pick up the cadence reading from a sensor that's attached to the crankarm (where the pedals are). There should be one on that and probably one on the frame too right near the crankarm. If you slightly adjust their positions you should get the cadence to show up again. Keep in mind that some computers have to be put into cadence mode before you see the cadence. In other words, you might have to press buttons on the computer before you see the cadence shown on the display.

Hope this helps you out,
Jim

NEWSWIRE: CUSTOM BICYCLES BOOK REVIEW

Like A Visit To the NAHBS - But In A Book!


If you haven't heard of the NAHBS, it stands for the North American Handmade Bicycle Show, a not-to-be-missed event that brings together the gifted artisans from around the world who build custom frames and bicycles. Ordinarily, you'd have to visit the framebuilders to view their work and learn about their philosphy of design and cycling background. But, this super show, gives you full access in one place, which is quite a treat.


A couple of years ago, the show was held in San Jose, California and I was there to see the phenomenal craftsmanship, innovation and beauty in person. Here are some photos. This year, however, the show was held in Indianapolis, which was too far away for me to attend. So I was delighted to discover this new book about framebuilders and their work called Custom Bicycles, A Passionate Pursuit by Christine Elliott and David Jablonka. Like attending the NAHBS, this hardcover, 240-page coffee-table book takes you into the workshops of 39 custom bike builders from the United States, Canada, France, Italy, Germany, England and Australia.


Many of these builders are familiar to me, like Richard Sachs, Bruce Gordon, Jeff Jones, Bilenky Cycle Works, Cycles Alex Singer, Lynskey, Steve Potts Bicycles, Pegoretti and others. But there are new frames and faces too, like Atum22, Wolfhound Cycles and Crisp Titanium. And, all are lovingly depicted in 300 large color photographs that capture their wonderful work and spirit. It's truly like a bicycle show in a book. Plus, the focus of the writing is on what brought the builders to bicycles and what their design theories are, so you feel like you get to know each artist and understand the type of machine they'd build you.


I thoroughly enjoyed Custom Bicycles and recommend it highly. The only thing is that reading it is a lot like visiting the NAHBS. When you get done, you'll probably wonder how you're going to find the funds to buy all those dreambikes you now simply have to have. At least with the book, though, you can keep ogling the pages. I've been going back and forth between Columbine Cycle Works with their luscious lugwork, Richard Sachs' flawless finish work, Jeff Jones' delightful curving tubes and sweet head badge and Bruce Gordon's over-the-top custom components and accessories... I just need to win the lottery.


Custom Bicycles, A Passionate Pursuit is available online from Amazon for about $40.